Wheels Manufacturing BSA Shimano Bottom Bracket
Model Info
MEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
Product Info
The Wheels Manufacturing BSA Shimano Bottom Bracket is easy to install and features enduro bearings and silicone seals for the best possible performance.
Product Details
Features
Two Enduro Silicone Dust Seals
One 2.5mm Aluminum BB Cup Spacers for Use with 68mm Wide BB Shell
One 1.8mm Aluminum BB Cup Spacers for Use with 68mm Wide BB Shell
One 0.7mm Aluminum BB Cup Spacers for Use with 68mm Wide BB Shell
Two 0.5mm Crank Spindle Spacers
One 1.0mm Crank Spindle Spacers
Bottom Bracket / Frame Interface – ISO/English or BSA Threaded (1.37 in x 24 TPI)
Bottom Bracket Shell I.D. – 33.6-33.9 mm
Crank Spindle Diameter – 24mm
Weight – 105g
Compatibility
Compatible with The Following Cranksets with 24mm Spindle Diameter – Shimano HollowTech II / FSA / RaceFace EXI, X-Type, MegaExo / Rotor 3D, Agilis
Compatible with the following Bottom Bracket Standards: – ISO/English or BSA Threaded (1.37 in x 24 TPI) / 73mm BB Shell Width
Crank Spindle Type – HollowTech II (Shimano, FSA, Etc.)
Specs
- Material: Aluminum
-
Used For:
Enduro
More
Used For
Enduro If you’re looking for maximum performance while flying down heavier trails, an enduro bike is for you. These bikes combine ample suspension travel (typically 150mm+) with descent-focused frame geometry and components that allow for reasonably efficient pedaling. - Shell: 68/73 mm
- Spindle (mm): 24
- Warranty: Limited Lifetime
| Size | 24mm, 68/73mm |
|---|---|
| Weight (g) | 105 |