K2 Mindbender 108 Ti Skis + Marker Griffon 13 ID Ski Bindings 2023
Model Info
MEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
Product Info
K2 Mindbender 108 Ti Skis 2023
If the Mindbender series reaffirmed K2's status as an industry leader in the world of freeride, it's the 108 Ti that cemented it. The K2 Mindbender 108 Ti Skis are the burliest member of the family, delivering a powerful, smooth ride at the highest speeds while remaining nimble enough to navigate tight, technical terrain with composure and poise. K2 know when they're onto a good thing, so changes have been kept to a minimum and laser targeted at fine-tuning their already impressive performace. Modifications to the signature Titanal Y-Beam improve turn initiation and edge-hold, and a small increase in tail rocker means they're a touch more forgiving than the previous generation. A fantastic all-rounder for the modern freerider, the K2 Mindbender 108 Ti Skis are worthy of a place in any quiver.
Product Details
Rocker Type
All-Terrain Rocker – Skis with All-Terrain rocker have a gradual rise to the tip for great versatility in all conditions, with a short, low rise in the tail for added control variable snow.
Core
Fir / Aspen Core – Fir for power and impact resistance, with lighter weight Aspen for a lively energetic feel.
Laminates
Ti Y-Beam – TCD-optimized shape, placing Titanal directly over the edges in the forebody of the ski for powerful and consistent turn entry in variable and off-piste conditions. Underfoot, the Titanal spans the full width of the ski for maximum power transfer and control. In the tail, the Titanal narrows, tapering to allow the ski to break free on the back end of the turn while still remaining supportive.
Sidewalls
PowerWall – Power transfer to the ski's edges is dramatically enhanced with oversized ABS sidewalls that are laminated and pocketed within the wood core in the midbody of the ski.
Binding Compatibility
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Specs
-
Terrain:
All-Mountain, Big Mountain
More
Terrain
All-Mountain All-mountain skis are designed to handle anything you throw at them including powder, ice, groomers, steeps, heavy snow, and everything in between, but they aren’t necessarily a master of any one terrain. If you’re only going to own one ski to do it all, this is what you want. All-mountain skis generally have what we call mid-fat waists that range from 80-110 mm. Big Mountain Big mountain skis are designed for charging big lines with high speeds and big airs. These skis varry in width from wide, powder-oriented skis for skiing Alaska spines to narrower, mixed condition skis for ripping the beat up headwall at your local mountain. Skis in this category tend to be on the stiffer side, often with more rocker in the tip and less in the tail.
- Skis: No Bindings
-
Ability Level:
Advanced-Expert
More
Ability Level
Advanced-Expert Whether you charge the steepest lines, hit the biggest jumps in the park or carve with race-like precision, advanced to expert level skis, snowboards, boots and bindings are for the more aggressive rider. In skis and snowboards, you'll often find layers of metal, carbon or other stringers for rigidity and power, while advanced to expert level boots and bindings are usually on the stiffer side of the spectrum for rebound and precision steering.
-
Rocker Type:
Rocker/Camber/Rocker
More
Rocker Type
Rocker/Camber/Rocker Rocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
-
Turning Radius:
Long
More
Turning Radius
Long > 22 m radius is best for powder and big-mountain.
- Core/Laminates: Metal, Wood
-
Tail Type:
Partial Twin Tip
More
Tail Type
Partial Twin Tip Partial twin tip skis have a tail that is turned up, but not as much as the tip. This gives you the ability to ski backwards and back out of tight spaces, but these skis are mainly designed to ski forward.
- Warranty: 2 Years
| Size (cm) | 172 | 179 | 186 | 193 |
|---|---|---|---|---|
| Tip Width (mm) | 137 | |||
| Waist Width (mm) | 108 | |||
| Tail Width (mm) | 125 | |||
| Turning Radius (m) | 22.8 |
Marker Griffon 13 ID Ski Bindings
Freeride enthusiasts looking to drive wider skis without fear of pre-release have long looked to the Marker Griffon 13 ID Ski Bindings for their fantastic performance and reliability. They return with a re-worked Inter Pivot 3 heelpiece that significantly improves step in performance, thus eliminating the one qualm that some users had. Meanwhile, the redesigned Triple Pivot Elite 3 toe comes equipped with a new metal rail to scratch off ice and snow below your boot sole. And with Sole.ID technology to accommodate almost every boot sole norm, the Marker Griffon 13 ID Ski Bindings have you covered each and every time you click in.
Product Details
Toe Piece
Triple Pivot Elite 3 Toe – Toe construction with impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5° it provides the highest energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains.
AFD Gliding Plate – All Marker bindings (except the Jester Pro) are equipped with a moveable AFD (Anti Friction Device), allowing a precise release unhindered by dirt, snow, and ice buildup. The type of AFD is matched to the skier type, ensuring perfect functionality from racing to junior and even alpine touring.
Sole.ID – Marker Sole.ID allows Marker Authorized Retailers to adjust Sole ID equipped bindings to every type of adult ski boot sole, from ISO 5355 Alpine to ISO 9523 Touring, with a height adjustable gliding plate (AFD).
Anti Ice Rail – Use the metal rail to scratch off ice and snow below your boot sole.
Heel Piece
Inter Pivot 3 Heel – The newest generation Inter Pivot heel offers improved step-in performance, with a magnesium heel bracket for power transmission and energy absorption.
Additional Features
Stand Height – 24 mm
Recommended Skier Weight – 80+ lbs
Ski Compatibility
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Specs
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
- DIN / Release Value Low: 4
- DIN / Release Value High: 13
- Boot Sole Type: Alpine DIN (ISO 5355), Alpine Touring (ISO 9523), Walk to Ride (WTR), GripWalk (ISO 23223)
-
Warranty:
3 Years
More
Warranty
3 Years Visit https://www.evo.com/warranty-policy for more info.
| Size (mm) | 90 | 100 | 110 | 120 |
|---|---|---|---|---|
| Indiv. Binding Weight (g) | 1016 | 1018 | 1019 | 1022 |