40D Nylon Face Fabric

Exkin Platinum Fabric and Thermolite

Thermolite HL-1 – HL-1 high loft insulation is a fiberfill constructed with a unique 3D crimp of hollow-core and solid fibers, which provides excellent lightweight warmth with superior durability. The Thermolite insulation lofts up inside the Air Sprung Cells™ to prevent convective heat loss from your warm body to the cold ground.

Small – 66" x 21.5" x 2.5

Regular – 72" x 21.5" x 2.5"

Large – 79" x 25" x 2.5"

Thickness – 3" / 8cm

Dual Layer Air Sprung Cells – The Comfort Plus series has an internal layer of 40 Denier Nylon dividing the mat into an upper and a lower chamber. This allows the welds of the lower and upper cells to be offset throughout the entire mat, resulting in the greatest possible support and insulation, and a unique ability to fine-tune comfort. When on uneven terrain the bottom layer of the mat can be inflated to a high pressure as a barrier. The upper layer can then be adjusted - using the fine tune valve – for more comfort and softness.

Integrated Airstream Pumpsack – The Airstream™ Pumpsack is Sea to Summit's big volume mattress pump. The clever design opens at one end to stow the air mat and the other end unfolds to become the built-in pump. The Airstream™ Pumpsack can be inflated with a single breath and takes just two or three cycles to fill the mat. Not only is it faster than inflation by mouth, but there is minimal breath condensation entering the mat and it eliminates dizziness from blowing the mat up directly by mouth.

Includes – Quality stuff sack which doubles as a pump, a repair kit containing six self-adhesive patches for repairing punctures in the field, and two spare silicone one-way valve inserts.

Multi-function Valve for Fast and Easy Inflation, Deflation and Fine Tuning of Air Pressure

Anti-Microbial Treatment Added to TPU Lamination – To prevent delamination/mold issues caused by moist air trapped inside the mat.