CamRock – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 6 (1 Soft - 10 Stiff)

UnderBite – UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.

Full Poplar – Yes.'s baseline core for tip-to-tail woodcore snowboard construction. A core that strikes a predictable balance between durability and consistent flex and lightweight feel.

Biaxial Glass

Sintered Spec – The raw material is pre-consumer recycled (meaning it never left the factory) sintered base material. The heating and extrusion process softens it slightly, but it's still much harder than true Extruded.

Art by Guillaume Rousseaux

2 x 4 Inserts

Flex Rating – 6 - 7 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 3.0 Nylon Reinforced with 30% Glass Fiber – The new Hanger H3 features a wider bushing footprint that is closer to the board’s edges for enhanced board connection and faster energy transfer. The H3 also encompasses a reduction in weight, a dropped-down inner lateral wall for better ankle mobility, and is able to accommodate bigger volume boots. To top it off, it also has a new kingpin tool-less 2.0 that is more integrated and user friendly.

Canted 2.0 Footpillow

Post – Nylon with 50% Carbon Fiber

Freestyle Highback – Symmetrical geometry, minimal top curve for extra mobility, hidden flex hinge at the top 1/3, and Top Flair, which dampens chatter and eliminates calf-bite

Hyperfuse II Strap

3D Pro-Grip Toe Strap

Tool-less Adjuster Straps

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

Toe Hinge Connector

Nylon with Glass Fiber Buckle Levers

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Bushings – Comes with Medium (45 shore), and Hard (55 shore) Bushings

Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong