Alpine V1 Profile – The ALPINE V1 Profile design features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider’s performance in deep snow. The camber runs longer in the tail—providing extra power for the ascent or for larger riders drawn to a dedicated wide series.

Directional Flex

Flex Rating – 6.5 (1 Soft - 10 Stiff)

New Age Directional – NEW AGE DIRECTIONAL sidecuts are progressive sidecuts, which also incorporate a reverse sidecut arc in the midsection of the board. Due to a reduced effective edge as a result of hybrid camber shapes, this reverse camber arc provides a point of contact to retain control throughout the turn and is affectionately referred to as DEATH GRIP™.

Reinforced with Twin Forged Carbon Rods

Thermopolymer Hover Core™ – Enhanced with bonded post-consumer recycled Thermopolymer channels into ultra-lightweight select grain wood core strips, the THERMOPOLYMER HOVER Core™ is extremely light and strong with excellent dampening properties.

Carbon Fleece Power Shield™ – With two Carbon Fleece power pads underfoot, maximum thrusting power is achieved for ollies and stability under varied-terrain while torsional forgiveness allows for ease of command in battle.

Amplitex™ V-Tech Amplifier – Amplitex™ is a next-generation natural flax fiber woven with carbon strands that is featured in high-end snowboard constructions. This fusion tape brings the best of two worlds: the reactive energy of carbon and the lightweight and dampening aspects of flax. The two fibers are highly compatible since they have similar properties regarding thermal expansion and failure strain, creating a uniformly flexing reinforcement that's light, snappy and durable all in one.

Triax/Triax Holysheet™ – The HOLYSHEET™ fiberglass configuration features fiber weaves with a high tensile strength and low modulus of elasticity. With a higher roving count in the same weight of glass, you can have a stronger and more responsive board without adding extra weight. Triaxial fiberglass is placed on both the top and bottom of the core providing maximum strength, durability and performance.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

Inlaid Alloy Skid Plates – Reinforced with an ultralight skid plate, refined and reshaped to shave weight.

Full ABS1000 Sidewalls

Hyperdrive™ ADV – Custom formulated and exclusive to The Mothership, CAPiTA engineers have worked with the world's leading polyethylene running base supplier to create Hyperdrive™. With exceptional anti-friction properties due to high molecular mass and specialized processing aids, this sintered material has a proprietary composition and is beyond fast. For loyal and hard charging fans, CAPiTA have integrated the fastest, meanest base available.

Moonshot Omni-Tune™ – Aftermarket performance stone grind structure straight from The Mothership, optimized for regular and switch riding.

360˚ HRC48 Steel Edges

Skinless™ Core Ash Woodgrain Topsheet – Specially treated pure wood veneer topsheet with a unique tactile feel that is 220gm lighter than the standard process.

Multitech™ Level 3 DeepSpace™ Silkscreen – The DEEPSPACE™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.

Stainless Steel 2 x 4 Inserts

Flex Rating – 9 (1 Soft - 10 Stiff)

Stage 7 | Duraflex CB – Ultra-responsive Duraflex CB nylon is the key ingredient in an indestructible new design.

Vaporlite HD Bushing – All-new High Density Vaporlite is stiffer and more responsive than traditional Vaporlite, but with all the same dampening characteristics.

Extruded 3D Aluminum Heelcups – Designed for optimum heel hold and minimization of drag, Union 3D Extruded Aluminum heelcups are the strongest in the business.

Canted Footbeds

Tool-less FLAD

Stage 14 | Duraflex CB – Lighter, stiffer, and more responsive than previous Atlas highbacks, the Stage 14 Duraflex CB highback combines carbon injected Duraflex Nylon with an all-new integrated forward lean adjuster.

ExoFrame 5.0 Ankle Strap – Rapid response, trusted by professional snowboarders.

TS 4.0 SL Toe Strap – Multi-positional options and thermoplastic anti-slip material keeps you locked in and on point. Each version has differing amounts of material based on weight.

Tool-less Pin Strap Adjustment

Magnesium – Union's proven bombproof ratchet system, Magnesium buckles are light, sleek, and durable on the mountain.

Grade 8.8 Hardware – The strongest steel available on the market, Union's use of Grade 8.8 represents a commitment to delivering the strongest and most reliable bindings on the market today.

Camber Disk + Dual Washer – 2x4, 4x4, and Channel compatible.

Forged Carbon with Non-Stick EVA Disk Cover