System Rocker – If you want a surfy ride, natural float, buttery turns and spins, and catch-free tracking across the snow - all with highly reliable edge hold - then Arbor's System Rocker shapes are for you. System Rocker progressively reduces the amount of rocker toward the tip and tail and allows the outside contacts to easily engage when max edge hold is needed.

Flex Rating – 6 (1 Soft - 10 Stiff)

3° Uprise Fenders – Arbor’s Fenders are lifted side sections at the tip/tail of the board that create smoother performance without shortening the camber section of the board. As a result, you get a clean ride without any loss of the pop that comes from full-length camber.

Grip-Tech – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.

Double Barrel II Core – A progressive 1:2 Poplar and Paulownia blend with bamboo stringers running along the rails of the board for added torsional response and improved board control.

Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps, and more.

360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.

Recycled ABS – When a plastic alternative is unavailable, as in the case of ABS sidewalls, Arbor does its best to opt for a recycled material to improve the sustainability of their products.

Sintered Plus Base – Arbor's sintered plus base is mid-density material that demonstrates increased speed and durability while maintaining the ease of repair.

Recycled Steel Edges – Highly durable, recycled steel edges embody Arbor's key values: quality and sustainability.

Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.

Hand Dyed Ash Powerply – Sustainably harvested, majority coming from borer-kill trees, off-white to light brown, the canvas for Arbor’s hand-dyed designs.

R.A.P. Topless Technology – A build process in which Arbor eliminates the need for their Bio-Plastic Topsheet, creating a lighter, more eco-friendly ride.

Bio Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.

Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.

2x4 Fourteen Pack Inserts

System X – System X is a baseplate design that more efficiently transfers and evenly distributes a rider's energy into their snowboard. No matter where pressure is applied to the binding, the System X allocates energy across the baseplate's structural X shape, and out to the four cardinal points. The result is quicker, more effective control. 30% glass content for added strength and stability.

65A Durometer Outsole – The Outsole is a dampening interface made from a special TPE rubber. The Outsole integrates with the System X design and sits between the binding and a rider's snowboard. The Outsole diffuses high-frequency chatter while providing rebound and cushion for high-impact landings. On the Cypress, Arbor uses a slightly stiffer durometer TPE for added performance.

Adjustable Extruded Aluminum Heelcup – Highly durable extruded aluminum, designed to work with the Mini-Disk for amazing adjustability. Use the highback to center the foot and the disk to fine-tune your stance width.

2 XD Footbeds – The Cypress Bindings feature a dual-density footbed design that provides impact absorption, comfort, durability, and improved feel. The topside of the footbed is made with a firmer material that provides durability and a more tactile interface with a rider's boot. Under the ball and heel area, Arbor added impact absorbent EVA pods that interface directly with a rider's snowboard to improve board feel while adding cushion for landings and hard snow conditions.

EVA Footbed

Asymmetrical Highbacks – Arbor bindings feature low mounted asymmetrical highbacks with 5° pre-rotation, providing ergonomic feel and freedom of movement.

Tool-less Forward Lean Adjustment

Bow-Strap Adjuster – Arbor's patented "Bow-Strap" adjuster and ladder strap swings out of the way quickly and easily, making binding entry a simple, user-friendly experience. The pre-curved strap steers clear of your boot while maintaining form and durability in even the coldest conditions.

Co-Molded Ankle Strap

UltraGrip Convertible Toe Strap

Cast Aluminum Buckles and Levers – Arbor's upgraded buckles offer clean, ultra reliable performance, long-term durability, and a tighter, stronger click for unparalleled boot to binding connection.

2x4 Universal Mini-Disc – Mini-Disks require less surface area and along with the System X help provide a more organic snowboard flex underfoot. They are channel compatible.