C3 Camber – Aggressive dominant camber zones out to the contacts combined with mild rocker between your feet. Subtle Banana rocker gives freestyle freedom with maximum end-to-end stability for big, high-speed lines. For aggressive, skilled riders. EJack, Jamie Lynn, and Fredi K's favorite.

Medium - Stiff – Stout enough to charge your hardest but without excessive harshness.

Original Power Construction – 75% Aspen / 25% Paulownia – Light. Environmentally nice. Strong.

Triaxial / Biaxial Fiberglass

Birch Internal Sidewalls

UHMW Sintered Sidewalls

UHMW Tip / Tail Impact Deflection

Eco Sublimated TNT – The highest density UHMW and fastest base material without wax. TNT features a unique dual-layer thermal fusion “phase alteration” process which aligns the molecular chains into an engineered crystalline structure. The titanium layer reflects light and heat, keeping the base at or near snow temperatures. The crystal layer is the fastest base material without wax, making it a very consistent sliding surface in a wide variety of conditions and wax wear lifecycles. Wax to conditions as normal, but the board will remain fast even as wax wears.

Magne-Traction® – Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.

Eco Sublimated Poly Top – High strength, impact resistant, lightweight dimensionally stable UV and temperature resistant top material decorated using an environmentally friendly eco sublimation process.

Art by Aaron Fredricksson

Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.

2 x 4 Inserts

Soft Flex – Softer snowboard bindings are comfortable and forgiving.

Single-Component Lightweight, Bomb-Proof Polycarbonate Re:Flex™ – One material throughout the baseplate creates consistent response and feel for all-terrain domination.

Re:Flex™ Binding System – Offers more flex, feel, and cushioning than traditional disc bindings, in a package that's universally compatible with all current mounting systems, including 4x4, 3D® (via Burton Rider Service, sold separately), and the Channel®. The minimized, cored base-plate with Living Hinge™ disc reduces the weight and footprint of the binding, while also bending freely for a more natural flex.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

Single Component Construction – The simplicity of a one-piece hi-back means immediate response. Using Burton's book of material secrets, they can manipulate the overall flex profile -- from buttery to responsive.

Zero-Lean Canted Hi-Back Design – Your legs don't go straight up, and neither should your hi-backs. This ergonomic design follows the natural contours of your left and right legs to maximize control and comfort. Riders who prefer a more playful and relaxed feel will dig the Zero Forward Lean design on select hi‑backs. As always, you can still choose to crank ‘em forward for quicker control when carving or climbing icy pipe walls.

MicroFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker you heel-edge turns. Crank them forward for icy hits in the pipe or back them off for jibbing. Tool-free and micro-adjustable for easy fine-tuning and maximum angle options.

Hammockstrap™ 2.0 – Everything Burton's team riders love about the Hammockstrap, but paired with Smooth Glide™ buckles for a reduced profile and more comfortable fit.

Convertible Capstrap™

Smooth Glide™ Buckles – Lightweight aluminum and polycarbonate levers give you season after season of buttery smooth and reliable ratcheting power.

Re-Ground Materials to Reduce Waste

Compatible with All Major Mounting Systems – Please note, the 3D Hinge Disc is required for mounting on 3D systems (not included).

Soft Flex: 4 (1 Soft - 10 Stiff) – Playful, forgiving flex ideal for the park, beginners, or riders that prefer a soft, jibby boot.

Wishbone Upper Cuff – The Wishbone Cuff defies convention, combining power and freedom into one. Picking up where the Crossbone Cuff left off, it features Jumper Cables on both the medial and lateral sides for twice the snap, rebound, and life without sacrificing the high tweakability of a softer boot.

Soft Flex Tongue

Youth Imprint™Liner with Integrated Lacing – Burton’s latest liners reflect their three‑decade heritage by delivering snowboarding’s most comfortable, warmest, performance driven fit, right out of the box.

Speed Zone™ Lacing – Strong with a low-profile, Burton's Speed-Zone™ Lacing features lightning fast lacing control while allowing you to customize the fit of the upper and lower zone in seconds. More power means more rebound, wrap and response with less lacing effort.

Exclusive New England Rope Laces – American-made, lifetime warranty, natural fiber ropes power Burton's Speed Zone™ systems. Virtually indestructible, New England Ropes' laces are the same stuff used by stunt men, firefighters, and rescue teams.

DynoLITE Outsole – Superior cushioning, improved board feel, and consistent support in a 20% lighter weight construction. Made entirely of an exclusive cushioning compound specially formulated to withstand repeated impacts and freezing temps for long-lasting shock absorption.

Sleeping Bag Reflective Foil – This low-profile and lightweight underfoot technology reflects heat back to the feet, improving both warmth and comfort when faced with cold conditions.