Tip & Tail Rocker – Bends up only in the shovel and tail zones, with a camber shape in the middle.

3D Radius Sidecut – Three radii in one ski shape deliver maximum versatility - long radii at the tip and tail for stability and smoothness, and a short radius in the mid-body allows the skier to switch from long arcs to short turns at will, at any speed.

Multilayer Woodcore – A combination of beech and poplar results in an extremely durable wood core composed of hard wood in the binding area and lighter wood surrounding it.

Tailored Titanal Frame – The size of the frames is tailored to the skier's height, skiing ability and power. This means that longer ski models have a higher titanal content for more stiffness, more direct power transmission and stronger dampening. The shorter the length, the lower the titanal content, which makes the ski more agile, so that smaller, lighter and less powerful skiers can use the full potential performance of the ski.

Tailored Carbon Tips – In this innovative manufacturing process the new Tailored Carbon Tips are produced by embroidering the individual carbon fibers onto a carrier material. This allows them to be positioned exactly along the stress lines, opening up completely new possibilities, for performance at the front of the ski, which has a decisive influence on handling.

Full Sidewall Construction – Sidewalls from tip to tail delivers maximum power to the edge.

P-Tex 2100 Base

Brushed Structure

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Triple Pivot Light 2 Toe – GripWalk ready: Fits alpine and GripWalk soles

Anti Ice Rail – Use the metal rail to scratch off ice and snow below your boot sole.

Stainless Steel AFD Gliding Plate – MARKER bindings are equipped with a movable AFD (anti friction device) supporting a precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings or on ski tours.

Hollow Linkage 2 Heel – Improved step-in performance: 30% less step-in force + easier entry with GripWalk boots.

Stand Height – 24 mm

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 101 - 99 mm – Developed to permit skiers to regulate overall boot width from a range of 101 to 99 mm. Once VVF has been set, Panterra models may be skied, put on and taken off using remaining 3 buckles.

My Fit System – The Dalbello legendary fit got an upgrade in more than 60% of the boot range thanks to the My Fit System. Liner and shell can now be thermo customized in addition to the pre-molded Contour 4 shell which is included in every My Fit boot.

Women's Low Profile Geometry Cuff – Female boot models with a removable cuff insert that can expand the boot top opening circumference approximately 5 cm and lowers the overall boot height by 1.5 cm.

Flex: 85 – A medium flex that's great for intermediate to advanced skiers.

Flex Control – Forward flex characteristics may be adjusted to suit skier’s weight, skill level, and snow conditions.

TF Performer Liner

Cabrio Design – The Cabrio design is a 3 piece construction - shell/cuff/tongue – that comfortably secures the foot and lower leg while optimizing smooth and progressive flex. Dalbello’s Cabrio models provide the ultimate in responsive performance to ski your best.

Low Cuff Hinge Point – The low hinging cuff permits the boot cuff to more easily follow the natural anatomic movement of the skier’s legs because it has a longer range of forward and rearward hinging motion. For more efficient walking and gliding. Increased power and control with less energy.

Shell – DB Hyperlite

Cuff – DB Hyperlite

Adjustable Cuff Alignment – Permits skiers to align the lateral inclination of the upper cuff to the skier’s leg. Using 5mm Hex Tool, rotate the mechanism clockwise, or counterclockwise, to align boot cuff to desired position.

Ski & Hike Mechanism – As the burly cuff lock mechanism frees the upper cuff from the lower shell a long range of motion for functional hiking and climbing is guaranteed. Due to the unique Cabrio design it doesn't compromise skiing performance.

33° Total Range of Cuff Motion – 24° Forward Lean / 9° Backward Lean

F-6 Buckles

Micro-Adjustable Aluminum Buckles – A simple turn of a buckle! Micrometer buckles are easy to use for easy fit customization.

Dynalink Heel Retention System – The instep buckle travels in a direct line to the skier's heel, allowing buckle tension to minimize heel lift and sliding.

Inverted Forefoot Buckle – Forefoot closure buckles (above instep) are inverted to close on top of the bootshell, not on the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions.

Quick Macro Cuff Rack Extension – Extra wide cuff buckle catch can be easily moved into 1 of 3 positions (total range = 30mm) without tools, enhancing the cuff fitting capabilities for a wide variety of leg circumferences and shapes.

40mm Velcro Strap

Gripwalk Soles Equipped – Provides increased safety and improved natural roll thanks to a curved rubber sole and includes a high-profiled, slip resistant sole. Please make sure your bindings are Gripwalk compatible.