Christenson Surf Rocker – Custom tip/tail rocker profile designed by surf shaper Chris Christenson for the Mind Expander, Mountain Surfer and Storm Chaser. The nose rocker starts just inside of the front inserts and the tail rocker starts just at the back inserts. When you weight the tail of the board, the nose ramps up out of the snow for insane float on the deepest days. These subtle rocker contours match a Christenson surfboard rocker profile.

Directional Flex Pattern

Flex Rating – 7 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

FSC™ Bamboo Surf Core – Re-designed triple density Bamboo Surf wood core that features primarily paulownia stringers with bamboo stringers positioned in the pocket of the sidecut for better edge response and turn power.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved manouverability and stiffer through the tip and tail for stability and pop.

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Sustainable Flax / Basalt Stringers – Jones exclusive sustainable stringer made with 100% natural fibers. Composite Flax and Basalt stringer helps transfer power power to the edges, improves torsional response and absorbs board chatter.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

Traction Tech 1.0 – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

2 x 4 Insert Pattern

Flex Rating – 7 (1 Soft - 10 Stiff)

Comfort Foam Foot Pillow – Full length EVA foam footbed that maximizes binding comfort while minimizing foot fatigue. The 3D molded footbed surface offers supreme traction for any boot tread pattern and prevents snow build-up.

Hanger 3.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit. Nylon reinforced with 30% fiberglass.

Flushcup Technology

Progressive Flex Highback – Designed for precise and playful response. Symmetric mid-wide profile and medium flex for carving, tweaking airs and riding switch.

Dual Density Design that Gets Progressively Softer from Bottom to Top

Stiff Lower Section for Solid Carving Performance

Flexible Top Section for Lively Freestyle Performance

Tool-Less Forward Lean Adjustment

Highback Flex – 6 (1 Soft - 10 Stiff)

Comfort Flex Ankle Straps – Comfort Flex Ankle Straps are 3D molded to evenly distribute pressure and eliminate strap bite plus asymmetric for customizable response. Flip-It Strap compatible (Freeride mode + Surf mode).

3D Flex Fit 2.0 Toe Straps – 3D Flex Fit 2.0 toe straps dynamically stretch to fit any shape boot. The new minimalist design is even lower profile and every bit as comfortable, durable and responsive as the original design.

Flip-It Ankle Strap Technology – Side 1: Freeride mode / Side 2: Surf mode

Tool-Less Strap Adjustment

Hinge Connector Strap Attachment + Pre-Curved Ladders

Asymmetrical Buckles – Bombproof buckles made from aircraft-grade alloy featuring ultra-strong levers and springs. Triple action ratchet design increase speed of entry and release.

Freeride Mode – Position the wide half of the strap above the buckle for more lateral support and board response. Use Hard Bushings for maximum response.

Surf Mode – Position the wide half of the strap below the buckle for solid heel support but more ankle flexibility for getting loose. Use Soft Bushings for a looser, more dynamic surf feel.

Included Bushings – Hard - All Mountain / Freeride Mode

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel