Skip to Main Content

Custom Ski Boot Fitting & Molding - How to Make Your Boots Fit Better

How to make your ski boots fit better

The best way to start getting acquainted with new ski boots is to spend time wearing them at home. Put them on and watch a movie or game while standing and flexing them. Spending a few hours in your boots at home will allow your feet to become accustomed to being held stationary and rigid, which is quite different than normal shoes. It’ll also help you decide what adjustments you need to make at home and if you need any custom work done to the boots before you ski them. It’s better to figure this out in the living room than on your third ride up the chairlift on a perfect day.

Keep in mind that new ski boots are as snug as they will ever be right out of the box and the liners will compress as you ski them, making the boots roomier the more you use them.

Common Ski Boot Issues & Fixes You Can Do At Home

There are a few simple things you can do on your own to make your ski boots fit better. Below is a list of common problems and solutions you can try at home.

My Ski Boots are too Tight

If your ski boots are new, they may feel a bit tight. The foam liners of your ski boots will compress and "pack out" over time. If you have a slight level of discomfort in the first couple of days of skiing, this is normal, and will likely subside over time. Your ski boots should never be painfully tight, however. Think about what socks you are wearing - thin ski socks are actually warmer and can give you some extra room. Learn more about ski socks here. If you have specific areas of the boot that are tight or painful, you'll need to see a bootfitter to get them worked on. 

My Ski Boots are too Loose

If it feels like there is too much room in your ski boots, they are likely too big. While things can be done to make ski boots larger, like punching and grinding the shell, but it is difficult to make them smaller. Your best bet is to try out a smaller pair of ski boots. Short-term solutions like wearing multiple pairs of socks will likely just lead to other issues like blisters. 

I'm Having Trouble Buckling my Ski Boots

If you are having a hard time closing the upper cuff of the boot because it seems too tight, you may need to move the buckle ladder (the part with the teeth that hold the wire bale). Use an Allen wrench (often provided in your boot box) or Phillips head screwdriver to move the ladder.

My Ski Boot Buckles are too Tight or too Loose

Most boots have micro-adjustable buckles. Twist the buckles clockwise to shorten (tighten) or counter clockwise to lengthen (loosen) them. Doing this should enable you to find the perfect level of tightness.

The Cuff of My Ski Boot is too Tight or Pinching My Calves

Many ski boots have a wedge or spoiler between the liner and shell directly behind the calf. These are either screwed on or attached by Velcro. You can simply remove the spoiler to create more room in the upper cuff. If even the loosest buckle setting feels too snug, most boots have an adjustable plate or "ladder" for the top buckle straps that can be moved to provide a new, looser range of notches. Some ladders require that you undo a screw to move them (you’ll need a screwdriver or Allen wrench), others can simply be twisted or have a release that allows them to move.

My Ski Boot Doesn't Have Enough Arch Support

The stock footbeds provided by boot manufacturers do not offer much support, and probably don’t match the shape of your foot either. If you have a high arch or need better support underfoot, try replacing the footbed. You can use an aftermarket trim-to-fit footbed like those offered by Conform’able or Superfeet. These are fairly inexpensive footbeds that you cut to match the shape of the stock footbeds – lay the stock footbed over the aftermarket one, trace its outline, and trim the new one to match.

For even better performance and comfort, we strongly recommend having a custom footbed made by a trained boot fitter.

Things Your Bootfitter Can Do

While there are a lot things you can do at home to customize your ski boot fit, it's sometimes best to seek out a professional. A specialty ski shop with trained boot fitters like evo Seattle, evo Portland, evo Denver, or evo Whistler can perform extensive modifications to your boots. They are equipped with the proper tools and knowledge to help you achieve the best possible fit. Custom footbeds stabilize and balance the foot and are designed to fit your foot perfectly, while modifying the shell with heat or grinding allows it to take the shape of your foot and eliminates “hot spots” or pressure points.
How to make your ski boots fit better

Custom Footbeds Ski Boot

Every skier, regardless of ability or experience level, can benefit from having a custom footbed made for them. Custom footbeds are molded to your foot by taking an impression of it, then placing the heated footbed in the mold with your foot on top. The process of molding a custom footbed typically takes between 30 and 60 minutes. Think of a footprint in wet sand which is unique to you and supports your entire foot evenly. A supported foot is stable, strong, balanced and relaxed, while an unsupported one is weak, unbalanced and easily fatigued. Much of the discomfort skiers experience is a result of an unsupported foot trying to stay balanced and working too hard to steer the ski through the turn. Proper footbeds are essential for an effective fit.

Ski Boot Cuff Allignment

Once a footbed is selected, the next step is to check the alignment of the upper cuff. Ideally, you should be able to stand in a natural stance and have the base of both skis neutral (flat) on the snow. Not all skiers require cuff alignment, and not all boots offer a cuff adjustment feature, but ask a boot fitter if you suspect that the natural alignment of your legs puts unequal pressure on either your inside or outside ski edges.

Ski Boot Canting

Often confused with cuff alignment, canting refers to tilting or angling the entire ski boot laterally to achieve a neutral stance. This is done either by installing wedges under the bindings when the ski is mounted or planing the sole of the boot. Since this is not something that can be accurately done at home, canting should be left to a qualified boot fitter or shop with the right equipment.

Ski Boot Punches & Shell Modifications

When your bones are pressured by the hard plastic shell, you can expect problems. This is where shell modification comes into play. Modifying the shell to match the shape of your foot can be done by grinding the plastic away or by heating and reshaping the plastic with an assortment of specialized tools (also known as “punching” the boot). Common situations that call for modifying the boot shell include bunions, bone spurs, hardware or tender spots from surgery, and downsizing for the sake of performance.

If you're lucky enough to be near an evo store location in Seattle, Portland, Denver, or Whistler, swing by and have our expert bootfitters help you out.

Tired of Ski Boot Pain?

The evoFit program was designed to provide skiers with a high-quality custom boot fitting that balances comfort and performance for a wide variety of skier types. Learn more here, or visit any of our stores in Seattle, Portland, Denver, Salt Lake City, or Whistler for more details.  

Learn More With Our Other Ski Guides:


Discover Our Favorite Gear:

The Best Skis
The Best Women's Skis
The Best Beginner Skis
The Best All Mountain Skis
The Best Powder Skis
The Best Touring Skis
The Best Carving Skis
The Best Park Skis
The Best Intermediate Skis
The Best Freeride Skis
The Best Ski Bindings
The Best Touring Ski Bindings
The Best Men's Ski Boots
The Best Women's Ski Boots
The Best Touring Boots
The Best Ski Socks
The Best Beginner Ski Boots
The Best Value Skis
The Best Ski Poles
The Best Kids' Skis
The Best Kids' Ski Boots
The Best Cross Country Ski Boots
The Best Ski Boot Liners
The Best Gifts for Skiers

This is evo. We are a ski, snowboard, wake, skate, bike, surf, camp, and clothing online retailer with physical stores in SeattlePortlandDenver, Salt Lake City, Whistler, and Snoqualmie Pass. Our goal is to provide you with great information to make both your purchase and upkeep easy.

evo also likes to travel to remote places across the globe in search of world-class powder turns, epic waves, or legendary mountain biking locations through evoTrip Adventure Travel Trips. Or, if you prefer to travel on your own, check out our ski & snowboard resort travel guides and mountain bike trail guides.


Still have questions? Please call our customer care team at 1.866.386.1590 during Customer Care Hours. They can help you find the right setup to fit your needs.